Serialiser1.0.0.7

Serialiser is a lightweight application designed to work with COM ports and provide you with reading, writing and monitoring capabilities.It displays a user-friendly interface that consists of four tabs, each with its specific role in the process. It takes you a couple of seconds to configure the application and start reading serial data, writing to COM ports and analyzing the stored communication information.The application enables you to start and stop listening to COM port in real time. A connection is not made if the application is not set to “Listen” mode. While a connection is available and active, the tool displays all the incoming and outgoing communication data in a designated section of the interface. The amount it can display is limited though to 10.0000 characters.When you reach the mentioned limit, you can always use the ‘Clear’ button to erase all the displayed information. This action does not affect the actual log file in any way. If you need to, Serialiser also makes it possible for you to send text over the serial port.To help you make more sense of the logging process, the tool also displays the number of analyzed and logged lines.As far as port setup goes, the application allows you to set its name, baud rate, data bits, parity, stop bits and the values for the read and write time-out. You are also given the choice whether to run an analysis on the wrapped lines.With Serialiser, you can choose the logging add-ons you want to use. You can toggle between title to file, date to file, hours to file or date and time to lines. In case you run analysis tasks on multiple ports and don’t want to re-do the settings, the application enables you to save the used settings.So, if you’re looking to monitor and analyze COM portsm then Serialiser can get the job done.