Windows · Free download · General

Tekaba VoIP Gateway1.3.0.0

Tekaba VoIP Gateway : A SIP media gateway that runs as a Windows service, so as to forward incoming SMS messages as message requests, allowing automatic monitoring

Operating system
Windows 10/11
File size
1.6 MB
License
Demo
Last updated
May 1, 2026
Download Tekaba VoIP Gateway → Read review

53 downloads·600 page views

Sponsored

Overview

What is Tekaba VoIP Gateway?

Tekaba VoIP Gateway : A SIP media gateway that runs as a Windows service, so as to forward incoming SMS messages as message requests, allowing automatic monitoring

In depth

A closer look at Tekaba VoIP Gateway

As its name suggests, Tekaba VoIP Gateway is a SIP gateway application designed to convert telephony traffic into data that can be transmitted throughout a network. Based on the RFC 3261 protocol, it runs in the background as a Windows service, monitoring sent and received messages by a 3G USB Modem connected to your computer.You start by plugging in the 3G modem to your PC and once the computer identifies the hardware device, you must configure the VoIP route. Tekaba VoIP Gateway displays a simple and intuitive interface that enables you to easily set all the requires parameters.You can change the listening port (by default, this is 5080) and adjust the SRTP / RTP timeout. Tekaba VoIP Gateway supportsUPnP for NAT traversal and allows you to use an external IP address to forward incoming SMS messages as SIP requests. Such requests are then processed and the message content is sent back as a SMS.Changing the SIP proxy is just as easy: you must enter the SIP domain, proxy address and used port, enter the username and password (if required) and change the registration timeout.Before starting the service, Tekaba VoIP Gateway enables you to configure the telephony routes for VoIP to telephony message conversions. As such, you have to enter the source IP addresses and prefixes , destination prefixes and trunks. The application selects the best route it finds to send the SMS message. If the telephony routes are not configured, Tekaba VoIP Gateway will not be able to route VoIP calls and SIP requests.Tekaba VoIP Gateway is compatible with the UDP, TCP and TLS transport protocols, also logging call transfers, thanks to the SIP REFER method. It enables you to keep an eye on all active calls and their status from the 'Ports' tab.
  • At least 2048 MBytes of RAM
  • 3G USB Modem with Huawei chip which supports audio

    • Requirements

    System requirements

    Windows 10 64 bit / Windows 10 / Windows Server 2012 / Windows 2008 64 bit / Windows 2008 / Windows 2003 / Windows 8 64 bit / Windows 8 / Windows 7 64 bit / Windows 7 / Windows Vista 64 bit / Windows Vista

    Verdict

    Should you download Tekaba VoIP Gateway?

    Tekaba VoIP Gateway runs on Windows 10/11 and is available under the Demo license — the installer is 1.6 MB. We’ve catalogued it under General.

    Verified clean. Every Tekaba VoIP Gateway build on SoftLookup is scanned for viruses, spyware, adware, trojans and backdoors. We re-test on every update.
    Sponsored

    At a glance

    Tekaba VoIP Gateway specifications

    Category
    General
    Publisher
    KaplanSoft
    Last updated
    May 1, 2026
    Requirements
    Windows 10 64 bit / Windows 10 / Windows Server 2012 / Windows 2008 64 bit / Windows 2008 / Windows 2003 / Windows 8 64 bit / Windows 8 / Windows 7 64 bit / Windows 7 / Windows Vista 64 bit / Windows Vista
    License
    Demo
    Operating system
    Windows 10/11
    File size
    1.6 MB
    Price
    Free
    Page views
    600

    Leave a comment

    Help fellow users decide. Share your experience with Tekaba VoIP Gateway.

    Download Tekaba VoIP Gateway ↓