1st Virtins Sound Card Signal Generator4.0

Virtins Sound Card Signal Generator is a powerful PC based virtual instrument. It consists of a sound card based Signal Generator and an off-line Oscilloscope. 1. The dual channel Signal Generator (Sweep/Arbitrary/Function Generator) provides the following types of waveform for output: (1) Sine (2) Square (3) Triangle (4) Saw Tooth (5) White Noise (6) Pink Noise (7) Multi-tones (8) Arbitrary via user-configurable waveform library at either a fixed frequency, or a frequency that sweeps linearly or logarithmically within specified frequency range and time duration. 2. The dual-channel off-line Oscilloscope provides four types of views: (1)Wave form display of Channel A and Channel B (2)Wave form display of Channel A + Channel B (3)Wave form display of Channel A - Channel B (4)Lissajous Pattern display for Channel A and Channel B The off-line Oscilloscope can be used to view the signal generated by the Signal Generator. It can also be used to view the WAV files recorded by other sound recording software. SpecificationBandwidth: 10 Hz - 96 kHz (depending on Sound Card) Maximum Output Voltage: about 2 VAC (depending on Sound Card) Selectable sampling frequency (up to 192 kHz), sampling bit resolution (8, 16 or 24 bits) and sampling channels (one or two) (all depending on Sound Card) Support predefined waveforms: Sine, Square, Triangle and Saw Tooth. They can be generated at a specified fixed frequency ranging from 1 Hz to up to 96 kHz Support non-repetitious pink noise and white noise generation Support multi-tones generation. Multi-tones is a combination of the predefined waveforms with different amplitude and frequency. Pink noise and white noise with specified amplitude can also be added into multi-tones. Maximum 32 tones can be combined in each channel Support arbitrary waveform generation through user defined waveform library. The waveform library is a TXT file containing the coordinates of each point of the ...