Information on ftape drive compatibility with Linux
This HOWTO discusses essential do's and dont's for the ftape floppy tape driver under Linux. It focusses on the newest version which is ftape-4.02 at the time of this writing. This HOWTO is to be intended as first step help and source of information. The ftape driver interfaces to QIC-40, QIC-80, QIC-3010 and QIC-3020 compatible drives, and to the Iomega Ditto 2GB and Ditto Max drives. The QIC-3010 and QIC-3020 standards are also known as `Travan' (TR-2 and TR-3). These drives connect via the floppy disk controller (FDC) which may be either an internal FDC or inside of certain parallel port floppy tape drives. Please refer to the section Supported drives for further information. ftape does not cover SCSI or QIC-02 tape drives. DAT tape drives usually (always?) connect to a SCSI controller. This is but one of the Linux HOWTO documents. You can get an index of the HOWTOs from the Linux HOWTO index, while the real HOWTO's can be fetched (using ftp) from sunsite.unc.edu:pub/Linux/doc/HOWTO (this is the ``official'' place) or via the World Wide Web from the Linux Documentation Project home page.
ConclusionTo conclude Ftape-HOWTO works on Linux operating system and can be easily downloaded using the below download link according to Not Specified license.
Ftape-HOWTO was filed under the HOW-TO category and was reviewed in softlookup.com and receive 2.1/5 Score.
Ftape-HOWTO has been tested by our team against viruses, spyware, adware, trojan, backdoors and was found to be 100% clean. We will recheck Ftape-HOWTO when updated to assure that it remains clean.
Ftape-HOWTO user ReviewPlease review Ftape-HOWTO application and submit your comments below. We will collect all comments in an effort to determine whether the Ftape-HOWTO software is reliable, perform as expected and deliver the promised features and functionalities.
Popularity 4.2/10 - Downloads - 200 - Score - 2.1/5
|File size:||Not specified|